Prerequisites
One of the following operating systems:
Windows Server 2003 (32-bit only)
Windows 2000 (Service Pack 2 or above. Service Pack 4 is recommended)
Windows NT (Service Pack 6)
SCSIport Miniport driver
| Note |
If you are running Windows 2000 with Service Pack 2 and have the SCSIport Miniport driver installed, the NO_STOPREQ parameter in the EmulexOption must be disabled (it is enabled by default).Perform this task after you have installed the SCSIport Miniport driver and the driver utilities.
|
If you are using storage from one of our partner vendors, click on the Drivers, Software and Manuals link at the top of this page. Links to Emulex partner vendors are located near the top of the Emulex Documentation, Drivers and Software page. Click on the appropriate link to go to the storage vendor's portion of the Website for the correct version of the driver. If you do not see a link for your storage vendor, check with the vendor before loading a driver to determine the version of the driver they support.
Fibre Channel drives connected to the host adapter using fiber optic or copper duplex media (user supplied).
Compatibility
HBAnyware version 2.1a1 is compatible with the following Fibre Channel host bus adapters (HBAs):
LP10000ExDC and LP1050Ex (minimum firmware version 1.90a4)
LP10000DC and LP10000 (minimum firmware version 1.80a2)
LP1050DC and LP1050 (minimum firmware version 1.80a3)
LP9802DC, LP9802 and LP982 (minimum firmware version 1.00a4)
LP9402DC, LP9002L, LP9002DC, LP9000 and LP952L (recommended firmware version 3.90a7)
LP8000, LP8000DC and LP850
LP7000E (minimum firmware revision 3.21a0)
All BootBIOS versions, however we recommend 1.60 or higher
Supports arbitrated loop, point-to-point and fabric topologies
|
